DIY Packraft | Jeremy | Mentions https://www.diypackraft.com/members/akjw7/activity/mentions/ Activity feed mentioning Jeremy. Wed, 15 Apr 2026 15:50:51 -0700 https://buddypress.org/?v= en-US 30 hourly 2 b8a7da5c320c0370b08b3e7e7087e1fd Matt (Admin) replied to the topic Help & Questions re: DIY Packraft Construction in the forum DIY Packrafts http://www.diypackraft.com/forums/topic/kit-plans-construction-questionshelp/#post-2767 Mon, 20 Mar 2017 23:59:12 -0700 Hi Jeremy, @akjw7

In general, a good place to start is in piece #5 (either Left or Right) near the seam with piece #4 and on the down-slope on the outside of the tube. If you’re measuring during construction, that’s about 38 cm (15″) up from the corner between pieces 4 and 5 on the outside of the tube, and about 7 cm (2.75″) away from the seam.…[Read more]

]]> 0 afeaa357cbd81653b58027e3308232e1 Matt (Admin) replied to the topic Help & Questions re: DIY Packraft Construction in the forum DIY Packrafts http://www.diypackraft.com/forums/topic/kit-plans-construction-questionshelp/#post-2767 Mon, 20 Mar 2017 23:59:12 -0700 Hi Jeremy, @akjw7

In general, a good place to start is in piece #5 (either Left or Right) near the seam with piece #4 and on the down-slope on the outside of the tube. If you’re measuring during construction, that’s about 38 cm (15″) up from the corner between pieces 4 and 5 on the outside of the tube, and about 7 cm (2.75″) away from the seam.…[Read more]

]]> 0