-
gbarker replied to the topic Layering fabrics? in the forum DIY Packrafts 7 months, 1 week ago
Before building a skeena, I designed and built a packraft of my own which involved layering up two layers of approximately 250gsm fabric together. These were TPU coated on one side only, with the coated surfaces facing inwards. It did work OK except for a few wrinkles and as noted above, the laminated fabric is stiff.
I wasn’t overly happy with t…[Read more] -
Matt (Admin) replied to the topic Layering fabrics? in the forum DIY Packrafts 7 months, 1 week ago
Yes and no… You can layer fabrics together to make something stronger, but you can’t iron directly onto TPU without making a mess, so at least one of the fabrics has to be coated on only one side. The woven fabric is less resistant to abrasion than the TPU (and soaks up water and dirt, etc.), so depending on the application, that may or may not…[Read more]
-
Mrmagoo started the topic Layering fabrics? in the forum DIY Packrafts 7 months, 1 week ago
Would layering fabrics together with a clothes iron create a stronger fabric than a single heavier layer? Or would the resulting fabric loose too much flexibility? What would the result of layering two 190GSM fabrics together for a floor be vs a single 475 GSM floor?
-
Mrmagoo replied to the topic Intrigued by ultralight roll top packraft. Tell me why it's a bad idea in the forum DIY Packrafts 7 months, 1 week ago
<p style=”text-align: left;”>The roll top closure doesn’t intrigue me as much as the 3 piece construction does. According to anfibio that results in lower weight for the same fabric strength. Not sure how true that is, but their RTC is pnly 2.6 lbs for 210D fabric. Planning to make my first packraft in the coming months.</p>
-
morphy_richards became a registered member 7 months, 1 week ago
-
SamWestover replied to the topic Paddling flatwater with a dog in the forum DIY Packrafts 7 months, 1 week ago
Awesome, thank you both. 🙂
-
Mrmagoo became a registered member 7 months, 2 weeks ago
-
Smokescreen became a registered member 7 months, 3 weeks ago
-
Matt (Admin) replied to the topic DIY Dry Bag Score Line Mistake in the forum DIY Packrafts 7 months, 3 weeks ago
Hi troc, thanks for the feedback – I will try to make that more obvious.
I think it will be easier if you simply trim off the red fabric and make a sandwich like you described. Remember you will need to extend the strip past the edges of the bag so you can attach the buckle. If you’ve trimmed the end flush with the edge of the bag, you can splice…[Read more]
-
troc started the topic DIY Dry Bag Score Line Mistake in the forum DIY Packrafts 7 months, 3 weeks ago
I just received my first kit. I separated the scored portions at the bottom of the bag, but I didn’t realize the top was also scored until after I attached the 2 sided TPU ribbon piece. I don’t have quite enough of the ribbon to redo it on the correct part. Is it a better idea to weld the other side of the ribbon to the bag’s top (creating a…[Read more]
-
troc became a registered member 7 months, 4 weeks ago
-
mttgilbert replied to the topic Paddling flatwater with a dog in the forum DIY Packrafts 7 months, 4 weeks ago
I made the two person for my dog (55lb english lab) and I plus camping gear and I’ve really liked it. There’s plenty of space and weight capacity. I have a closed cell foam piece cut to fit the front of the boat for the dog (simple blue closed-cell sleeping pad, which doubles as the dogs bed in camp).
I was hesitant about the canoe style sea…[Read more]
-
Andriy became a registered member 7 months, 4 weeks ago
-
mokiraz became a registered member 8 months ago
-
Matt (Admin) replied to the topic Paddling flatwater with a dog in the forum DIY Packrafts 8 months ago
Hi Sam,
Other than the Ultralight, any model will handle a 50 lb dog without popping. For alpine lakes, I would probably choose an Atlin (the largest size), because it’s wider in the foot area so there’s more room to share between the two of you. If you were going to be paddling with the pup for hours at a time, I’d consider a Skeena XL for even…[Read more]
-
SamWestover started the topic Paddling flatwater with a dog in the forum DIY Packrafts 8 months, 1 week ago
I’m in love with my Alpacka Wolverine for whitewater, but I’m interested in building one of your packrafts to be able to paddle on alpine lakes and quiet rivers with my dog, Lucy, who weighs about 50 lbs. I’m not looking to pack a lot of gear, though I guess I might have a backpack, if I’ve hiked in somewhere with the boat.
– Do you recommend…[Read more]
-
SamWestover became a registered member 8 months, 2 weeks ago
-
Matt (Admin) wrote a new post 9 months, 2 weeks ago
Discount at Charity Auction
It’s that time of year again! If you’d like to save some money on a DIY Packraft order and give to charity at the same time, you can bid on a $25 […] -
Ned Norton became a registered member 9 months, 2 weeks ago
-
Matt (Admin) wrote a new post 9 months, 3 weeks ago
MasterSeal Zippers in Stock
The MasterSeal airtight zippers are back in stock! The MasterSeal and SuperSeal zippers are made by TIZIP, the world leader in airtight zippers, […] - Load More

