-
Matt (Admin) replied to the topic Help & Questions re: DIY Packraft Construction in the forum DIY Packrafts 8 years, 11 months ago
Hi Jeremy, @akjw7
In general, a good place to start is in piece #5 (either Left or Right) near the seam with piece #4 and on the down-slope on the outside of the tube. If you’re measuring during construction, that’s about 38 cm (15″) up from the corner between pieces 4 and 5 on the outside of the tube, and about 7 cm (2.75″) away from the seam.…[Read more]
-
Matt (Admin) replied to the topic Help & Questions re: DIY Packraft Construction in the forum DIY Packrafts 8 years, 11 months ago
Hi Jeremy, @akjw7
In general, a good place to start is in piece #5 (either Left or Right) near the seam with piece #4 and on the down-slope on the outside of the tube. If you’re measuring during construction, that’s about 38 cm (15″) up from the corner between pieces 4 and 5 on the outside of the tube, and about 7 cm (2.75″) away from the seam.…[Read more]
-
Matt (Admin) replied to the topic Help & Questions re: DIY Packraft Construction in the forum DIY Packrafts 8 years, 11 months ago
testing to see if nesting is working….
-
Matt (Admin) replied to the topic Help & Questions re: DIY Packraft Construction in the forum DIY Packrafts 8 years, 11 months ago
In general, a good place to start is in piece #5 (either Left or Right) near the seam with piece #4 and on the down-slope on the outside of the tube. If you’re measuring during construction, that’s about 38 cm (15″) up from the corner between pieces 4 and 5 on the outside of the tube, and about 7 cm (2.75″) away from the seam.
I recommend using t…[Read more]
-
Matt (Admin) replied to the topic Help & Questions re: DIY Packraft Construction in the forum DIY Packrafts 8 years, 11 months ago
In general, a good place to start is in piece #5 (either Left or Right) near the seam with piece #4 and on the down-slope on the outside of the tube. If you’re measuring during construction, that’s about 38 cm (15″) up from the corner between pieces 4 and 5 on the outside of the tube, and about 7 cm (2.75″) away from the seam.
I recommend using…[Read more]
-
Jeremy replied to the topic Help & Questions re: DIY Packraft Construction in the forum DIY Packrafts 8 years, 11 months ago
Curious if you have a how-to or suggestions for methods and location of installing the top up valve. Thanks! – Jeremy
-
Jeremy replied to the topic Reply To: Help & Questions re: DIY Packraft Construction in the forum Help & Questions re: DIY Packraft Construction 8 years, 11 months ago
Curious if you have a how-to or suggestions for methods and location of installing the top up valve. Thanks! – Jeremy
-
Jeremy started the topic Reply To: Help & Questions re: DIY Packraft Construction in the forum DIY Packrafts 8 years, 11 months ago
Curious if you have a how-to or suggestions for methods and location of installing the top up valve. Thanks! – Jeremy
-
Thorlene became a registered member 8 years, 11 months ago
-
Matt (Admin) started the topic Tips & Tricks in the forum DIY Packrafts 8 years, 11 months ago
Please post any tips and tricks you have developed during construction of your DIY Packraft. I frequently update the How-To pages based on your feedback!
Note: If you wish to reply to a specific comment below, please click the grey “Reply” link above the specific comment you are responding to – then your comment will appear nested below that…[Read more]
-
Matt (Admin) started the topic Help & Questions re: DIY Packraft Construction in the forum DIY Packrafts 8 years, 11 months ago
Please post your DIY Packraft kit/plans construction-related questions here (or on the appropriate How-To page!).
-
olivier beurret became a registered member 8 years, 11 months ago
-
Oskar replied to the topic Alternative sources for fabric and other materials in the forum DIY Packrafts 8 years, 11 months ago
SOLD!
-
Oskar replied to the topic Alternative sources for fabric and other materials in the forum DIY Packrafts 8 years, 11 months ago
SOLD!
-
Oskar replied to the topic Alternative sources for fabric and other materials in the forum DIY Packrafts 8 years, 11 months ago
SOLD!
-
davslife's profile was updated 8 years, 11 months ago
-
Matt (Admin) wrote a new post 8 years, 11 months ago
Check out the pontoon boat my friend Tim of http://www.cubenmaker.com is making with the 210D heat sealable fabric! And guess what the weight is – only 11 lbs (5 kg) as tested, and probably closer to 13 lbs (5.9 kg) […]
-
Matt (Admin) replied to the topic DIY Packraft Photos in the forum DIY Packrafts 8 years, 12 months ago
Check out Andy’s red DIY Packraft!
-
nitarae became a registered member 8 years, 12 months ago
-
Nate became a registered member 8 years, 12 months ago
- Load More
