Hi Matt, you absolutely can use this photo! As for the skeg, I don’t have any pictures of the current revision but here is what V1.0 looked like. As you can see it’s a two part design to make printing easy (three if you count the skeg) and is compatible with Intex skegs. Base is TPU and top is PETG, but V2.0 is all TPU since I have determined that with a high enough infill the top is stiff enough to constrain even a deep skeg when crabbing. To attach to the raft I prepped a section of seam with aquaseal, then HH-66ed the base to that section to ensure a good plastic-plastic bond instead of trying to glue directly to the fabric. The top is then heatsealed/welded to the bottom piece on the tabs you can see.
