-
Matt (Admin) replied to the topic Fly and hike and raft in the forum DIY Packrafts 8 months ago
I’m sorry to hear that the Ultralight isn’t the right packraft for your adventures, but it sounds like you’ve already done some great paddling – Icebreaker – haha! That’s fantastic!
-
Matt (Admin) replied to the topic DIY Packraft Photos in the forum DIY Packrafts 8 months ago
Thanks for posting these great pictures, Eric! That looks like an amazing trip – gotta love those clear mountain lakes. I’m glad the fishing rod holders worked, too – I think you’re the first person to try that in the Ultralight. Fantastic!
-
Matt (Admin) replied to the topic DIY Packraft Photos in the forum DIY Packrafts 8 months ago
Thanks for this detailed report, Opie – it looks like you did great work! I plan to post this in the Customer Build Reports gallery along with your tips and tricks so this doesn’t get buried in the forum thread. I think you’re the first person to provide such detailed feedback about the 2-Person build – thanks!
-
Matt (Admin) commented on the post, Inflation Bag Boston Valve Adapter 9 months, 3 weeks ago
Haha, I never thought of that, but you’re absolutely right – you could just iron the flange to the bag.
You might be able to screw the inflation bag flange onto the boat’s check valve after it’s screwed in for the final top-up… yes, I do think that would work. The downside is that screwing the bag on and off would almost certainly take…[Read more]
-
Matt (Admin) wrote a new post 10 months ago
New Inflation Bag Assembly Instructions
As part of my ongoing effort to improve the DIY Packraft instructions, I’ve completely remade the inflation bag assembly instructions video and […] -
Matt (Admin) replied to the topic DIY Packraft Photos in the forum DIY Packrafts 10 months ago
Awesome! Thanks again for the feedback, Sylvain 😀
-
Matt (Admin) replied to the topic DIY Packraft Photos in the forum DIY Packrafts 10 months ago
That’s awesome! Congratulations, Jim, and thanks for posting!
I had the pleasure of finally meeting Bruce and his family recently – what a great guy!
-
Matt (Admin) wrote a new post 10 months, 2 weeks ago
New Heat Sealing Iron
This iron from Aliexpress was recommended by Bruce Campbell of Fairbanks, Alaska – a man of many great ideas! I bought one to try it out for myself, […] -
Matt (Admin) commented on the post, Ultralight Packraft Kits In Stock 10 months, 2 weeks ago
I think it would be okay, but I don’t have a dog, so I’m not really sure… maybe take a look at the fabric comparison video or order a fabric sample pack so you can decide.
-
Matt (Admin) replied to the topic DIY Packraft Photos in the forum DIY Packrafts 10 months, 4 weeks ago
Excellent work, and great ideas! Thanks for sharing, Kaytree!
-
Matt (Admin) replied to the topic DIY Accessories in the forum DIY Packrafts 11 months, 2 weeks ago
Cool! Great idea!
-
Matt (Admin) replied to the topic Fabric measurements for Telkwa and extremetextil.de in the forum DIY Packrafts 11 months, 3 weeks ago
I’m really glad you’re enjoying your Telkwa, and it looks like you did great work, but using my design to make another packraft without asking for permission is really not cool.
-
Matt (Admin) commented on the post, Punctures, Leaks, & Repairs 11 months, 4 weeks ago
That’s interesting – thanks for the tip, Zach! Did it coat the entire inside of the packraft? That might actually be a nice option for people who are looking for a bit of extra security and who don’t mind the adde weight. Cheers!
-
Matt (Admin) replied to the topic Reinforcing Strips bulging in the forum DIY Packrafts 1 year ago
That looked like a fun paddle! I’m glad everything is coming together.
-
Matt (Admin) wrote a new post 1 year ago
Inflation Bag Boston Valve Adapter
Evan Rodgers emailed to show me this simple and ingenious method of using a second Boston valve to create an inflation bag adapter that screws into […]-
That’s really cool. I need to come up with an adapter that functions the same way for my pump but also supports the top-up valve.
-
I found this 3d printed adapter posted on Printables.com. It is a perfect fit for the boston valve and, with a slight internal diameter adjustment, will fit snugly over the top-up inflation stems for the backrest and seat.
https://www.printables.com/model/809119-inflation-bag-adapter-for-packraft-boston-valve
-
If I understand correctly, cutting the Boston valve isn’t necessary. You just need a flange on the inflation bag and put a valve piece between the inflation bag flange and the packraft flange. This should work because I think flanges can be screwed to both ends of the value (with the cap open obviously). You can use a valve with the rubber bit removed to quickly inflate the packraft then switch to a valve with the rubber bit still there to top up the with the inflation bag (no longer needing to top off with your lungs). Is this correct? Is that how you have been using it? I’m considering getting another Boston valve for my inflation bag to try it out. Does it work well?
-
Haha, I never thought of that, but you’re absolutely right – you could just iron the flange to the bag.
You might be able to screw the inflation bag flange onto the boat’s check valve after it’s screwed in for the final top-up… yes, I do think that would work. The downside is that screwing the bag on and off would almost certainly take longer than using your mouth for those last five or six breaths. It’s possible you could get a higher air pressure in the packraft using the bag, but because the threads aren’t a perfect match between the flange and the top side of the check valve, I’d be careful to avoid damaging them by trying to force a lot of air in.
I actually haven’t tried the valve-in-the-bag method myself, so if you test this before I get to it, please let us know how it works out!
-
-
-
Matt (Admin) wrote a new post 1 year ago
Web Store MaintenaceSome of the software I use to run the DIY Packraft Shop has recently been updated to enhance security and functionality, so if you encounter any […]
-
Matt (Admin) replied to the topic Reinforcing Strips bulging in the forum DIY Packrafts 1 year ago
Great solution! I hope the first float was a success.
-
Matt (Admin) replied to the topic Reinforcing Strips bulging in the forum DIY Packrafts 1 year ago
Hmm, that’s unusual… I’ve actually never seen that before. Could you send me some pictures from the inside of the cockpit, and maybe take one or two shots through the valve opening so I can see where tubes 4L and 4R are attached to the floor (if possible)? It does look like something might be separating there, but I can’t tell why. Can you see…[Read more]
-
Matt (Admin) replied to the topic in the forum DIY Accessories 1 year ago
Very cool! I was thinking about foot rests just before you posted this, because I’m testing out a new seat, somewhat similar to yours. The footrest looks like a great design. I’m curious if you’ve tried using it without stuff inside it, just inflated – you mentioned that the larger one felt like pressing against a balloon, but I wonder if this one…[Read more]
-
Matt (Admin) replied to the topic Parchment paper question in the forum DIY Packrafts 1 year ago
Great to know! Thanks for the update.
- Load More
