Chilko Seat Attachment Points

Approximate time required: 45 minutes.

Note: You may want to add these attachment points after you’ve set up your thigh straps and back band (so you know where you want to locate the seat fore and aft).

Note: Adjust the seat height by letting air out of the seat.

Assembly Steps:

1. Iron Preparation & Heat Sealing Practice If this is your first DIY Packraft, do not skip this step!
2. Separate Fabric Pieces
3. Mark & Label Fabric Pieces
4. Inflation Bag
5. Footrest
6. Seat
7. Back Band
8. Inflatable Floor Insert
9. Packraft Assembly:
   1. Tubes 3R & 3L
   2. Tubes 2R & 2L
   3. Tubes 1R & 1L
   4. Front Center Seam
   5. Apply Sealant to Inside Forward Seams
   6. Airtight Zipper (optional)
   7. Tubes 4R & 4L
   8. Inflation Valve
   9. Rear Center Seam
   10. Inflate & Test for Leaks
   11. Apply Sealant to Outside Seams
   12. Thigh Straps
   13. Seat Attachment Points
   14. Other Attachment Points
10. Spray Deck Assembly (optional)
11. Spray Skirt Assembly (optional)

Questions? Please leave a comment below!